state of charge

Articles, guides, and products tagged "state of charge" — a combined view of every catalogue resource on this topic.

User guide

Scooter lithium-ion battery lifecycle and recycling engineering: cross-cutting sustainability axis — EU Battery Regulation 2023/1542 (Battery Passport DPP + recycled content + due diligence + carbon footprint declaration) + WEEE Directive 2012/19/EU + UN ST/SG/AC.10/11/Rev.7 Manual of Tests and Criteria 38.3 (T.1-T.8 transport) + IEC 62902:2019 marking + ISO 12405-4:2018 state-of-health + IEC 62660-3:2022 abuse tolerance + ISO 14040:2006/14044:2006 LCA + EN 15804:2012+A2:2019 EPD + hydrometallurgical/pyrometallurgical/direct recycling processes + second-life ESS applications

Engineering deep-dive into the lifecycle and recycling of e-scooter lithium-ion batteries as the seventh cross-cutting infrastructure axis (sustainability axis), parallel to [fastener engineering as joining axis](@/guide/fastener-and-bolted-joint-engineering.md), [thermal management as heat-dissipation axis](@/guide/thermal-management-engineering.md), [EMC/EMI as interference-mitigation axis](@/guide/emc-emi-engineering.md), [cybersecurity as interconnect-trust axis](@/guide/cybersecurity-engineering.md), [NVH as acoustic-vibration-emission axis](@/guide/nvh-engineering.md), and [functional safety as safety-integrity axis](@/guide/functional-safety-engineering.md). Covers: 10-row regulatory matrix (EU Battery Reg 2023/1542, WEEE 2012/19/EU, UN 38.3, IEC 62902, ISO 12405-4, IEC 62660-3, ISO 14040/14044, EN 15804, Basel Convention, EPR schemes); EU Battery Regulation phased timeline 2024-2031; Battery Passport (DPP) data points per Annex XIII; recycled content targets 2031 and 2036; due diligence on Co/Li/Ni/natural graphite per Annex X; carbon footprint declaration per PEFCR; LMT collection rates 51% by 2028 / 61% by 2031; UN 38.3 T.1-T.8 transport tests; SoH assessment per ISO 12405-4; 4-row recycling process comparison (pyro vs hydro vs direct vs mechanical); material recovery Annex XII (Co 90→95%, Li 50→80%, Ni 90→95%); 6-row second-life matrix (home ESS, peak shaving, EV charging buffer, off-grid solar, frequency regulation, streetlight reserve); 4-row recyclers timeline (Umicore, Northvolt Revolt, Li-Cycle, Redwood Materials); 8-step DIY end-of-life check; 6-step DIY pre-recycle prep; industry shift 2020→2026; 16 numbered sections.

17 min read

User guide

E-scooter thermal-management engineering: IEC 62133-2:2017 § 7.3 thermal abuse, UL 2272:2024 § 21 abnormal-charging + thermal abuse, ISO 12405-4:2018 PEV battery thermal characterization, JEDEC JESD51-1/-2A/-7 R_θJC measurement, IPC-2221A § 6.2 PCB conductor temperature rise, IEC 60068-2-14:2009 thermal cycle Test Na/Nb, IEC 60068-2-30:2005 humidity cyclic Db, ISO 16750-4:2010 thermal/mechanical environmental conditions, MOSFET junction-temperature limit T_J_max 150-175 °C with R_θJC 0.3-2 °C/W (Infineon IPP/IPB series, Onsemi NTMFS, ST STH240N10F7-6), Arrhenius doubling rule (every +10 °C halves component life of NMC/LFP cells), BMS thermal fold-back when T_cell > 45-50 °C (charge cut-off / discharge derate), hub-motor stator copper I²R loss = I² × R_Cu(T) with temperature coefficient α_Cu = 3.93×10⁻³/°C + iron eddy loss P_eddy ∝ B² × f² × t² (Steinmetz), thermal time constant τ_th = R_th × C_th (continuous-vs-peak power derating motor 5-30 s peak / continuous 30-300 s steady-state), TIM (thermal interface materials): Bergquist Gap Pad k=1.5-6 W/(m·K), Arctic MX-6 grease k=8.5 W/(m·K), PCM Honeywell PTM7950 k=8.5 W/(m·K), cooling topologies (natural convection h_nat 5-25 W/(m²·K) / forced air h_forced 25-250 W/(m²·K) / liquid cold-plate h_liquid 500-20 000 W/(m²·K)), thermal-runaway propagation in 18650/21700 cells (T_onset 130-150 °C NMC, 180-200 °C LFP — LFP significantly safer per CPSC + UL data), CPSC recalls (hoverboards 2016 — 501 000 units recalled for thermal runaway, Lime Gen 2 2018 19.2-Wh packs thermal events, Bird Two 2018 charging thermal incidents)

Engineering deep-dive into e-scooter thermal management as a cross-cutting infrastructure axis — parallel to [fastener engineering as joining axis](@/guide/fastener-and-bolted-joint-engineering.md), [bearing engineering as rotation axis](@/guide/bearing-engineering-iso-281-l10-life.md), and [IP engineering as sealing axis](@/guide/ingress-protection-engineering-iec-60529.md). Covers: 8-row standards matrix (IEC 62133-2:2017, UL 2272:2024, ISO 12405-4:2018, JEDEC JESD51-1/-2A/-7, IPC-2221A, IEC 60068-2-14, IEC 60068-2-30, ISO 16750-4); 6-row component temperature-limit matrix (Li-ion cell, MOSFET T_J_max, NTC thermistor, electrolytic cap ESR/lifetime, hall sensor, BLDC stator winding insulation Class B/F/H 130/155/180 °C); 5-row heat-source matrix (motor I²R + iron loss / controller switching + conduction / battery I²R + polarization / charger SMPS / brake regen); MOSFET R_θJC junction-temperature methodology + derating; battery thermal management (BMS fold-back, Arrhenius +10 °C aging doubling, NMC vs LFP runaway onset 130-150 vs 180-200 °C); hub-motor stator copper-loss formula P_Cu = I² × R_Cu × [1 + α_Cu × (T-25)] + Steinmetz iron-loss P_iron = k × B^β × f^α; thermal time constants τ_th + continuous-vs-peak derating curve; TIM selection (Bergquist Gap Pad / Arctic MX-6 / Honeywell PTM7950 PCM); 3 cooling topologies (natural convection 5-25 W/(m²·K) / forced air 25-250 / liquid cold-plate 500-20 000); Arrhenius doubling rule + IEC 60068-2-14 Test Na/Nb thermal cycle; 6-row failure-diagnostic matrix (cell venting + smoke / MOSFET solder reflow / NTC drift / electrolytic-cap bulge / hall-sensor drift / winding insulation breakdown); 8-step DIY thermal check; 6-step DIY remediation; 3 CPSC case studies (hoverboards CPSC-16-184 501 000 unit 2016, Lime Gen 2 thermal events 2018, Bird Two charging thermal 2018); 17 numbered sections.

16 min read

User guide

Pre-ride safety check for an electric scooter: ABC and M-check in 60 seconds — daily routine adapted for the folding mechanism, battery and regenerative brake

A pre-ride check on an e-scooter is not marketing ritual — it's a 60-second window to intercept the three failure classes responsible for most solo falls and fires: (1) mechanical — under-torqued stem clamp or folder (Xiaomi's June 2019 M365 recall covered 10,257 units precisely because the screw in the folding apparatus could come loose, causing the vertical arm to break off mid-ride), microcracks at the deck, a perforated sidewall; (2) braking — a stuck pad, a warped disc, air in a hydraulic line, severely worn pads; (3) electrical — battery at 18% when the route needs 28%, a dropped display connector, a throttle that won't return to zero. CPSC's 2024 numbers: 227 lithium-ion micromobility incidents — 39 fatalities, 181 injuries. This guide adapts the League of American Bicyclists' ABC quick check and the full Sustrans/REI M-check for the e-scooter's specifics: high-CoG silhouette, folding stem, regenerative brake, display-with-BMS warnings. Ten sections — from pre-ride-failure statistics to a 60-second printable template.

13 min read